WAV File:
Synthesis process evidence
For my Composition I decided to Compose a Digicore Style track. This genre often uses lots of layered Plucky leads, and uses lots of synthesisers and processing. Most of my instrumental sounds were made in either Serum 2 or Vital.
For my first Instrument I used Vital to make a plucky lead. I used the first oscillator with a square wave at a. in the Envelope, I turend the sustain all the way down, shortend the decay, And increased the attack just slightly. My goal was to create a pluck with a slight gradual slide into the peak. I think I achieved the sound I was aiming for somewhat and moved on to the internal effects rack. I Put a compressor and changed the settings and added a delay at 1/4 tempo and turend up the feed back and cutoff.
my next sound was a copy of the first one with the attack all the way down. I left my effects the same.
For this sound I used a preset using a different lead wave form in the first oscillator to create an airy pad. i added a lot of effects so that the sound would be obfuscated and warmer.
This sound was an attempt and making a Reese bass. I used a signle saw wave in ocillator 1 with 16 voices in the unison tab. the sustain all the way up in the envelope so the sound would be consistent. I added distortion on the down sample setting.
This next sound I created in Serum 2. I created anouther pluck using a saw wave and triangle wave in the first 2 oscillators. and added a bit of compression. I enjoy how bouncy this sound is.
I needed a buzy mid layer in the back ground for a new section so I added a Square wave and a saw wave together. In the Effects rack i added delay and a filter on the dirty setting with the drive half way.
Using a rectangler squarewave and a saw wave, i created a new sound for a sort of chorus section in the track.
Anouther mid layer
Mixer Window showing all audio FX
